Find Gear Box Reductor, High Efficiency Deceleration Machine, Reductor Deceleration Machine on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > PC Series Gear Reducer > Reductor Gear Box High Efficiency Deceleration Machine

Reductor Gear Box High Efficiency Deceleration Machine

  • Reductor Gear Box High Efficiency Deceleration Machine
  • Reductor Gear Box High Efficiency Deceleration Machine
  • Reductor Gear Box High Efficiency Deceleration Machine
  • Reductor Gear Box High Efficiency Deceleration Machine

Reductor Gear Box High Efficiency Deceleration Machine

    Payment Type: L/C,T/T,D/P,Paypal,Money Gram,Western Union
    Terms of Trade: FOB,CFR,FCA,CPT
    Min. Order: 1 Set/Sets
    Delivery Time: 15 Days
    Packaging: By carton or wooden package Export standard packages
    Productivity: 5000PCS
    Brand: DONGDA
    Transportation: Ocean,Land,Air
    Place of Origin: SHANDONG
    Supply Ability: 10000PCS
    Certificate: ISO9001
    HS Code: 8483409000
    Port: QINGDAO,SHANGHAI,SHENZHEN

Basic Info

Model No.: STANDARD

Product Description

Reductor Gear Box High Efficiency Deceleration Machine

Gear Box Reductor High Efficiency Deceleration Machine Reductor Deceleration Machine

Gear Box Reductor and special reducer design selection method is the biggest difference is that the former is applicable to various industries, but can only according to the working conditions of a specific design, so when the user needs according to their own requirements to consider different correction coefficient, the factory should choose according to actual motor power (not reducer rated power); Reductor Deceleration Machine, Which is designed according to user's special condition, the coefficient, when the design generally have been considered, chooses as long as meet when using power less than or equal to the rated power of the Speed Reducer, the method is relatively simple.

High Efficiency Deceleration Machine, General reducer is generally rated power each use (condition) coefficient of KA = 1 (motor or turbine as the prime mover, smooth machine work load, work every day 3 ~ 10 h, start times, 5 times or less per hour allowed torque startup torque for the work of 2 times), contact strength safety coefficient SH material 1, single failure probability of gear material 1%, calculate and determine the conditions of such as.


The rated power of the selected reducer shall be satisfied, High Efficiency Deceleration Machine Gear Box Reductor High Efficiency Deceleration Machine Reductor Deceleration Machine

PC = P2 * KS * KA KR PN or less Gear Box Reductor High Efficiency Deceleration Machine Reductor Deceleration Machine

Where, PC -- computing power (KW); Gear Box Reductor High Efficiency Deceleration Machine Reductor Deceleration Machine

Rated power of PN - reducer (KW); Gear Box Reductor High Efficiency Deceleration Machine Reductor Deceleration Machine

P2 -- working machine power (KW); Gear Box Reductor High Efficiency Deceleration Machine Reductor Deceleration Machine

KA - using coefficient, considering the influence of working condition;

KS - startup coefficient, considering the influence of start-up times; Gear Box Reductor High Efficiency Deceleration Machine Reductor Deceleration Machine

KR - reliability coefficient, considering different reliability requirements. Gear Box Reductor High Efficiency Deceleration Machine Reductor Deceleration Machine

Countries around the world use the same coefficient of use.Although many samples didn't reflect on KS \ KR two coefficient, but because the bosom friend (working condition requirements for its clear), knowledge (features) on the performance of the gear reducer, model selection of the abroad generally have left a large amount of rich, equivalent to have considered the influence of KR \ KS.

Due to the use of different occasions, the important degree of different, the damage to the personal safety and production loss caused by the size different, maintenance easy, so for the reducer reliability requirement is not the same.The coefficient KR is the reliability required to modify the reliability of the original design.It complies with ISO6336, GB3480 and AGMA2001 - B88 standards for calculating gear strength.Some domestic users have not yet issued the requirement for the reliability of the reducer, which can be according to the design rules of the general special reducer (SH > 1.25, failure probability less than 1/1000). For more important occasions, KR=1.25=1.56.[4]


Check shaft load:
General reducer often must be around the middle of the input shaft and output shaft axis and allow the biggest under radial load limits, should be check, should be to the factory more than put forward bold trunnion and increase bearing requirements.
Lubrication and maintenance
Before putting into operation, install the recommended type and value of grease in the reducer.The reducer is lubricated by lubricating oil.For the vertically mounted reducer, additional lubrication measures are adopted in view of the possibility that the lubricating oil cannot guarantee the reliable lubrication of the top bearing.
Before running, inject proper amount of lubricating oil into the reducer.The reducer is usually equipped with injection hole and drain plug.Therefore, the installation location must be specified when ordering the reducer.
Working oil temperature should not exceed 80 ℃.
The combined reducer with lifelong lubrication is fully filled with synthetic oil in the manufacturing plant. In addition, the reducer is usually supplied without lubricating oil and with injection plug and discharge plug.The number of decelerator lubricants listed in this sample is only an estimate.The position of the oil level plug is set according to the installation position specified at the time of ordering to ensure the correct oil injection. The fuel injection amount of the reducer should be determined according to different installation methods.If the transmission power exceeds the heat capacity of the reducer, an external cooling device must be provided.

Gear Box Reductor High Efficiency Deceleration Machine Reductor Deceleration Machine

Gear Box Reductor High Efficiency Deceleration Machine Reductor Deceleration Machine

Gear Box Reductor High Efficiency Deceleration Machine

photobank1

OUR COMPANY INFORMATION

Dongda Group is located in the "Hometown of Confucius and Mencius," the Jining City, Shandong Province. With registered capital of RMB 11.18 million and the area of 80,000 square meters, the group owns total assets of RMB 200 million .With strong technical force, adhere to the idea--- science and technology is the first productivity, quality is life, the existing staff more than 500 people. It has developed to a comprehensive company with annual production increased to billions.

Dongda Group has 10 series, more than 70 products. Including coal feeder, belt type coal feeder, reciprocating type of coal feeder, mine pneumatic pump, pneumatic diaphragm pump, pneumatic sewage pump, mine dual fluid grouting pump, explosion-proof immersible pump, wear resistant steel plate, shotcrete machine, dry type shotcrete machine, wet type shotcrete machine.

Jining Dongda Electromechanical Co.,Ltd.

 Shandong Dongda Group subordinate enterprises includes Shandong Kuangan electromechanical Co.,Ltd Jining Dongda electromechanical Co.Ltd,Jining Dongda Electric Co., Ltd . Dongda Group is located in the "Hometown of Confucius and Mencius," the Jining City, Shandong Province. With registered capital of RMB 11.18 million and the area of 80,000 square meters, the group owns total assets of RMB 200 million .With strong technical force, adhere to the idea--- science and technology is the first productivity, quality is life, the existing staff more than 500 people. It has developed to a comprehensive company with annual production increased to billions. Dongda Group has 10 series, more than 70 products. Including mines lifting equipment, transport equipment, communication signal equipment, personal-protective equipment, ventilation equipment, mining cleaning equipment, supporting equipment, drilling machines and accessories, mining pump, electrical equipment, lighting equipment ,rock drilling equipment and other products. Now ,hundreds kinds of products have been exported to more than 60 Countries and regions. Such as USA, Australia, Russia, Canada, Middle East, Africa etc Dongda Group has succeeded in passing a number of certification systems which are ISO9001, 2008 quality management system certification, CE certification ,Alibaba GIS certification, SGS certification (made in China) . With excellent quality and competitive price , Dongda group is to establish long-term, broader economic and trade cooperation and strategic partnership with a number of large state-owned enterprises and customers, and won the unanimous approval of them.

Company Info

  • Company Name: Jining Dongda Electromechanical Co.,Ltd.
  • Representative: Sun Hua
  • Product/Service: Coal Mine Equipment , Coal Feeder , Hoop Directing Device , Diaphragm Pump , Electric Pump , Electric Winch
  • Capital (Million US $): 30000000
  • Year Established: 2004
  • Total Annual Sales Volume (Million US $): Below US$1 Million
  • Export Percentage: 21% - 30%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 5
  • No. of R&D Staff: 11 -20 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 50,000-100,000 square meters
  • Factory Location: JINZOU ZONE,HIGH-TEC DISTRICT,JINING CITY,SHANDONG PRVINCE ,CHINA
  • Contact Person: Mr. kevin
  • Tel: 86-537-2902388
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters